Carly, Conference Operator: Thank you for standing by. My name is Carly, and I will be your conference operator today. At this time, I would like to welcome everyone to the Enerpac Tool Group Q3 Fiscal twenty twenty six Earnings Conference Call. All lines have been placed on mute to prevent any background noise. After the speakers’ remarks, there will be a question and answer session.

Thank you. I would now like to turn the call over to Darren Kosick, CFO. Please go ahead.

Darren Kosick, Chief Financial Officer, Enerpac Tool Group: Thank you, operator. Good morning, and thank you for joining us for Enerpac Tool Group’s earnings call for the third quarter of fiscal twenty twenty six. Joining me on the call today is our President and Chief Executive Officer, Paul Sternleab. Also joining us is our new Senior Director of Investor Relations, Christian Audi. Christian brings more than twenty five years of capital markets experience to Enerpac.

Most recently, he served as head of investor relations at ADNOC Gas, one of the world’s largest energy companies. Earlier in his career, he was a top ranked institutional investor analyst at Morgan Stanley and Santander. I know you will all enjoy working with him as your primary contact. Christian?

Christian Audi, Senior Director of Investor Relations, Enerpac Tool Group: Thanks, Darren. It’s great to be here. I look forward to working with all of you. On today’s call, we will reference non GAAP measures. You can find a reconciliation of GAAP to non GAAP measures in the press release issued yesterday.

Our comments will also include forward looking statements that are subject to risks that could cause actual results to be materially different. Those risks include matters noted in our latest SEC filings. The slides referenced on today’s call are available on the Investor Relations section of the company’s website, which you can download and follow along with us. A recording of today’s call will also be made available on our website. Now I’ll turn it over to our COO, Paul.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Thanks, Christian, and welcome to the team. There was a lot to be pleased about in the third quarter of fiscal twenty twenty six. Last quarter, we said we expected to capture mid single digit growth in our product business and generate improving trends in our service operations. I’m very pleased to say that we delivered on that plan, albeit with a greater than anticipated headwind from the protracted conflict in The Middle East, but more on that in a few minutes. Clearly, major news, we announced yesterday afternoon, is that we have signed a definitive agreement to acquire specialized fabrication equipment group or SFE group, which we expect to close in the first quarter of fiscal twenty twenty seven subject to regulatory approvals and customary closing conditions.

If I can step back a moment, over the past several years, we have communicated that m and a is a key aspect of Enerpac’s overall growth strategy. We have also emphasized the disciplined nature of our process, ensuring that any transactions meet our strategic and financial objectives and create shareholder value. At the same time, we have been clear about our pursuit of high quality assets that boast premium brands and strong margins similar to Enerpac. With SFE Group, we believe we have found a company that meets or exceeds all of these criteria. As shown on slide five, SFE Group is a leading global provider of specialized fabrication and industrial tool solutions for critical industries.

Like Enerpac that dates its brands back to 1959, SFE Group is comprised of complementary market leading brands, the oldest dating back to 1936. Today, SFE Group offers products across three categories: pipe beveling and on-site machining, orbital welding and cutting, and tools and lifting equipment. Importantly, as shown on Slides six and seven, the acquisition of SFE Group will expand and strengthen our position in attractive high growth verticals, including defense, power generation, and semiconductors and data centers. With SFE Group’s reputation for quality, durability, reliability, and innovation, we believe the acquisition will enhance our portfolio and create additional opportunities to leverage our global scale, distribution network, and technical and applications expertise. And with the addition of SFE Group, we will also expand Enerpac’s addressable market by approximately $1,000,000,000, raising our total SAM from roughly $4,500,000,000 to $5,500,000,000.

The addition of SFE Group will also bring a seasoned and talented management team. In addition to their manufacturing, operations, and commercial expertise, they have a demonstrated record of successful acquisitions and integrations, a skill that will aid Enerpac in the future as we continue on our growth trajectory. At the same time, we believe Enerpac can add value to their growth and capture revenue synergies. Presently, approximately 70% of SFE Group sales are in The U. S.

As such, we see an opportunity to leverage our international distribution and accelerate international expansion. And that is just the beginning as we can utilize Enerpac’s US national account relationships to further drive penetration. These are just two examples of the accelerated growth we believe that we can achieve together. Additionally, we expect to achieve key cost synergies over time, which Darren will elaborate on a bit further. Let me turn the call over to Darren to discuss some additional financial aspects of the acquisition.

Darren Kosick, Chief Financial Officer, Enerpac Tool Group: Thanks, Paul. As shown on Slide eight, SFE Group generated trailing twelve month sales through 03/31/2026 of approximately $170,000,000 and adjusted EBITDA of approximately $44,000,000. With a purchase price of approximately $472,000,000, that translates to a multiple of 10.6 times trailing adjusted EBITDA. We intend to fund the acquisition through a combination of borrowings under our revolving credit facility and the activation of approximately $225,000,000 under the accordion feature of our senior credit agreement. We have maintained a conservative balance sheet, and this transaction reflects the disciplined deployment of that financial flexibility.

Upon closing the acquisition, Enerpac’s net debt leverage will be approximately 2.8 times adjusted EBITDA. Based on our expected cash flow generation of the combined Enerpac and SFE Group businesses, we anticipate reducing leverage to approximately 2.2 times within twelve months after closing, with most of the reduction in the back half of fiscal twenty twenty seven. That will put us well within our target range of 1.5 to 2.5 times leverage. We expect the acquisition to be accretive to adjusted EPS in fiscal twenty twenty seven. We have modeled the near term assuming minimal cost synergies as we view SFE Group as a strong stand alone business.

As such, our return expectations are based on the quality of the business, its growth potential and future revenue synergies rather than near term cost reduction opportunities. That said, we do see upside to our already strong return expectations as we capture cost synergies over time from our combined scale and the structures we have established at Enerpac through the execution of our Ascend transformation program and our Powering Enerpac performance, or PEP, continuous improvement program. More specifically, we believe there are opportunities to leverage portions of our existing human resources, IT, and finance infrastructure. At the same time, we expect to make targeted investments in systems, controls, and reporting capabilities as we transition SFE into the Enerpac operating model and public company environment. Altogether, by year three, we anticipate adjusted EBITDA synergies of 4,000,000 to $6,000,000 based on our expected revenue and cost synergies.

Overall, we believe the acquisition represents an attractive use of capital, enabling us to add meaningful scale with the addition of a high quality business with strong margins, compelling growth characteristics, and opportunities to create additional value over time. We currently anticipate closing the acquisition during the first quarter of fiscal twenty twenty seven, subject to regulatory approvals and customary closing conditions. Now let me switch gears and make a few brief comments about our third quarter, starting with slide 10. For the third quarter, IT and S product sales increased 5% organically. Strong product sales were partially offset by a decline of 8% in the IT and S services business.

But as you may recall, last quarter, we announced actions to address a market slowdown in the service business in the EMEA region. We also announced a new five year service contract that we signed with a major UK North Sea oil and gas company. Aided by the initial benefits of both, our service business improved sequentially with a 17% gain in revenue and better profitability quarter over quarter, reflecting progress as we pursue our strategic transition toward higher margin service business and profitable growth objectives. At Cortland, shown in the other segment, we continue to deliver strong organic growth of 25% in the third quarter due to our ongoing success generating new customers and projects. Turning to slide 11, which shows organic growth performance by geography.

IT and S revenue in The Americas grew 6% year over year. Within that, product revenue increased 10% in the region. While the strength was broad based, as Paul will discuss, the standout end market was power generation, which includes our heavy lifting technology business, or HLT, which specializes in heavy lifting and moving solutions for the build out of data centers and infrastructure. Revenue in the Asia Pacific region, which is flat, was impacted by the conflict in The Middle East. In the oil and gas sector, refineries have delayed shutdowns in order to maximize production, which resulted in orders being pushed out.

More broadly, higher inflation is causing our end customers to look for ways to economize by delaying purchases. However, within the APAC region, Australia, Japan and South Korea were strong. Turning to the EMEA region. Third quarter revenue in the region was flat as the gains in product revenue was offset by a decline in service revenue. Of note, performance in the EMEA region was also impacted by the ongoing conflict in The Middle East.

As of last quarter’s call, we were only two weeks into the conflict. Given its protracted nature, the impact has been greater than anticipated. While difficult to estimate an exact amount, we are specifically aware of a $3,000,000 service project for a long term customer that was scheduled for the third quarter but delayed due to the conflict. That, in addition to other customer delays and impacted shipments in the region, resulted in a higher than expected headwind in the quarter. Overall, given the fluid nature of the situation in The Middle East, we’re expecting a similar environment in the fourth quarter but hope to see a return to more normal flow in the first half of fiscal twenty twenty seven.

Turning to Slide 12. Overall, as Paul mentioned, we executed to the operational levers that we laid out last quarter. In addition, we recognized a $6,000,000 net benefit from the expected refund of the IEPA tariffs. Excluding the benefit of the tariff recovery, gross margins were negatively impacted by mix given the higher growth rate of our heavy lifting technology, our HLT business, and continued dilution from our service business. Adjusted SG and A expense was higher, up 90 basis points as a percent of revenue.

We continue to invest in the business with higher R and D spend and expenses associated with new product launches, including the recent CONEXPO, where we launched six products. On a per share basis, we reported adjusted earnings of 60¢ in the third quarter of fiscal twenty twenty six, of which $08 was related to the tariff recovery. That compared with $0.51 in the year ago period. Cash flow was strong. On a year to date basis, cash flow from operations of $69,000,000 compared with $56,000,000 in the year ago period.

Free cash flow expanded by $20,000,000 to $60,000,000 the first nine months of fiscal twenty twenty six. And we were pleased to continue our share repurchase program, in which we repurchased approximately $15,000,000 in the quarter. Looking ahead, while we are pleased with the solid mid single digit growth in our product business and the sequential improvement in service in the third quarter, we have adjusted our full year guidance. The delay in service revenue in The Middle East due to the ongoing conflict has an outsized impact on margins given the high fixed cost nature of the business. Additionally, we expect the margin impact driven by mix given the higher growth of our HLT business, which carries slightly lower margins.

As shown on Slide 13, we now anticipate organic growth of 1% to 2% for the full year fiscal twenty twenty six, and we are guiding to adjusted EBITDA of $151,000,000 to $156,000,000 and adjusted earnings per share of $1.84 to $1.89 Given the strong cash flow performance to date, our free cash flow guidance remains unchanged. With that, let me turn it back to Paul.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Thanks, Darren. As Darren said and illustrated on Slide 14, the power generation vertical has been a source of particular strength for Enerpac’s HLT business in the Americas region. We have benefited from proactive engagement with existing customers. We have also launched a campaign targeting data center customers. These marketing initiatives have resulted in strong commercial activity, a growing funnel, and an expanding backlog as we promote the application of our mission critical moving systems to data center build outs and to those manufacturers making equipment in support of data centers.

And as I mentioned earlier, the addition of SFE Group will provide even greater exposure to the attractive power generation and data center end markets. SFE Group offers an extensive range of standard and customized solutions to ensure reliable performance and support critical operations in the power generation industry, including renewables and nuclear power. We also expect SFE Group to continue to generate meaningful sales in the data center market where piping and tubing are critical components of the cooling infrastructure. At the beginning of the call, I also mentioned Enerpac’s strong position in the growing defense market. As such, I am pleased to announce that we just signed a contract with a major European military contractor for nearly $5,000,000 to provide specialized lifting systems that support maintenance activities on a key vehicle.

We expect to ship the vast majority of that project in fiscal twenty twenty seven. Another aspect that makes SFE Group such a good fit for Enerpac is our shared culture of innovation. At Enerpac, we are pleased with the accelerated pace of innovation this year and the market’s reception to our recent product introductions as we continue to commercialize these launches. As shown on Slide 15, our new LU Series lightweight torque wrench pump, a portable pump for intermittent duty bolting applications, is a natural extension of our existing portfolio, addressing a sizable recurring applications opportunity. Moreover, like our other new products, we believe its design, features, and high reliability support Enerpac’s premium market position.

We are also excited about the launch of the dual machine skate set, our first integrated solution combining our heavy lifting technology with DTA’s moving and positioning technology. This system is purpose built for in factory movement of high value prefabricated data center modules and further strengthens our end to end heavy lifting and positioning portfolio spanning lift, jack, support, and controlled transport solutions. We have now introduced eight new products to date in fiscal twenty twenty six and are on track to deliver 10 for the full year, double the pace we achieved in fiscal twenty twenty five. Looking ahead, as outlined on Slide 16, we believe Enerpac can continue to capture mid single digit growth in our product business, given our position in attractive verticals and geographies, complemented by the success of our innovation program. Meanwhile, the service business continues to improve in terms of growth and margins.

And when the Middle East conflict resides, we do see an opportunity to support rebuilding efforts through both our product and service businesses. Finally, as you saw, we continue to generate strong cash flow and remain effective stewards of capital. Before we open the call to your questions, I’d like to take this opportunity to let everyone at SFE Group know just how excited we are to have them join the Enerpac team. We believe that our shared commitment to customers, quality, innovation, and operational excellence combined with shared cultural values makes us a natural fit as we combine our complementary products to enhance our position as a premier industrial solutions provider. With that, we’d be happy to take questions.

Carly, Conference Operator: Your first question comes from Will Gildea with CJS Securities.

Will Gildea, Analyst, CJS Securities: Good morning, Paul and Darren. Congrats on the acquisition.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Morning, Will. Thank Can

Will Gildea, Analyst, CJS Securities: you talk a little more about what you like about the company, what’s attractive? And it would also be helpful to know what the organic profile has looked like at SFP over the past few years and where it can go with, revenue synergies and your global distribution network?

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Yeah. No. We’d be happy to. Thanks again for the question. Look, we’re extremely excited about this acquisition.

As we highlighted in the prepared remarks, SFE is a business that has premium products and margins much like Enerpac’s positioning in the marketplace. It has the ability to drive strong growth, we believe, both organically and inorganically. In fact, its organic growth, has been in the high single digits or better in recent years, so we’re extremely pleased with the performance of the underlying business. It has exposure to higher growth end markets and geographies as we talked about and really a complementary position that expands our addressable market by about a billion dollars. It also, by the way, comes with an extremely strong management team who will stay on and become part of the Enerpac Tool Group team here.

So we’re super excited in terms of the talent, addition that it brings here at Enerpac. And then also as we talked about both opportunities on revenue and cost synergies over time, I think on the top line, our view is we certainly can leverage Enerpac’s international distributor network in our relationship with key national accounts. But, also, you know, SFE has access to other channels that Enerpac is underpenetrated in today. So I think it really does go both ways. And then I as we talked about or Darren mentioned, you know, I think early on, you know, cost synergies may be limited as we lean more into the integration, bringing it up to public company standards and driving more on the top line.

But we do, over time, certainly see opportunities, for, you know, operational synergies in terms of HR, IT, finance, and also, frankly, sourcing synergies, which we think may be some more low hanging fruit. So, all in all, we’re just super excited. We’ve, you know, been taking our time diligently to explore opportunities in the marketplace, and we believe this is really, for us, you know, an extremely great fit.

Darren Kosick, Chief Financial Officer, Enerpac Tool Group: And, Will, you know, I’d just add is, you know, you look at the business that Paul described and that we saw through diligence, it is a high quality business that we think we got an attractive valuation. So we’re very happy to bring the SFE Group into the family because we think it’ll propel growth in the forward in the future.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: By the way, we’re looking forward to the CJIS conference tomorrow in White Plains so we can share more.

Will Gildea, Analyst, CJS Securities: Yep. Yeah. We’re we’re looking forward to having you there and thank you so much for the color. So 10 times EBITDA multiple for that very attractive business is pretty reasonable. Was it a competitive process?

Just curious why the multiple wasn’t somewhat higher. Are there near term macro or other headwinds or anything like that that we should be thinking about?

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Yeah. This was, completely proprietary, Will, not in a process at all. In fact, the business wasn’t, you know, playing to sell at all. The the owner, Gladstone, is sort of effectively an evergreen fund, so they don’t have any sort of near term needs, to sell. And, you know, I think we just got together and, you know, we’re able to strike a deal that was, you know, meaningful for both parties and and make it work.

And so, as Darren referenced, we think, it’s an attractive valuation, certainly, at a multiple below where Enerpac is trading, frankly. And so, overall, I think it was a great deal all around.

Will Gildea, Analyst, CJS Securities: That’s great. That’s very exciting, and looking forward to seeing you all tomorrow. Thank you.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Thank you. Thanks, Will.

Carly, Conference Operator: Your next question is from Tom Hayes with ROTH Capital Partners.

Tom Hayes, Analyst, ROTH Capital Partners: Hey, good morning guys. Thanks for taking my questions.

Darren Kosick, Chief Financial Officer, Enerpac Tool Group: Good morning Tom.

Tom Hayes, Analyst, ROTH Capital Partners: Darren, maybe first on guidance, maybe you could provide a little bit more color on the rationale for some of the changes, key drivers and just kind of along those lines, are there any transaction costs from the SFE transaction in the fourth quarter? Should we expect anything?

Darren Kosick, Chief Financial Officer, Enerpac Tool Group: No. Great question, Tom. So I think where we sit today, as we look at the business for the last couple of quarters, we’re very proud of the mid single digit product growth, okay? That’s been the strength over the last couple of quarters. It’s been our service business.

You know, we’ve talked about that the last few quarters. That is slightly dilutive to the overall portfolio, and, obviously, we’ve been trying to reposition that business. We put on top of that the conflict in The Middle East. That’s been a drag on earnings. Okay?

So as we look at q four, as we look at the total year guide, q four looks candidly very similar to q three, albeit we won’t have the tariff recovery to help the margin rate out. So, you know, we’re thinking about q four in the same lens, candidly, as q three, low single digit growth, EBITDA margin in 23%, 24% range at the midpoint. Okay. You know, so as you kind of step back, that’s where we are today. Now from a transaction perspective, what we will do is that is not in the guide.

We will carve out those costs. We’ll tend to look at adjusted EBITDA excluding M and A cost and any noncash acquisition charges going forward, but we’ll share more on that in the future.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Yeah. And you will see in our Q, we did, of course, have some charges for this transaction in Q3 and there will be some fall through in Q4 as well.

Tom Hayes, Analyst, ROTH Capital Partners: Okay. And then maybe shifting gears a little bit to the product side. I know we had a chance to see some of your new products at CodExpo earlier this year. But maybe just kind of dive in a little bit more on the data center opportunity. You had mentioned it in the in your prepared remarks, just kind of where you see Enerpac finding a niche there?

And also, how does maybe the SFE kind of extend that further?

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Yes. No. Happy to, Tom. Look, mean, while it’s certainly small today, we do see it as an outsized growth opportunity for us, and we referenced that in our prepared remarks. You know, first off, for HLT specifically, and it’s in the slide deck, I think, on slide 14, you know, we’ve built, we’ve seen nice growth and built a nice backlog there.

And we do see a lot of that driven through either data center or data center related activity. What I’d highlight mostly is, you know, our products aren’t going maybe directly into a data center, meaning our customers aren’t hyperscalers themselves per se. More often, there are manufacturers that are making heavy equipment that has to go into a data center, and they need our equipment and tools to help manufacture, produce that equipment, move it around their facility, and ultimately move it into and position it inside a data center like some of these modular, solutions. So, so we are really pleased with the progress there. As we talked about, we’ve launched, some specific marketing campaigns focused at the data center market.

And then also, as we referenced, on the prepared remarks, we did just launch our new battery powered dual machine skate set. And that’s pretty exciting for us because now that we’ve owned DTA for about a year and a half, you know, we’ve been able to leverage, some of the technology that that team has developed and actually integrate it into our HLT solutions. So some of the early technology synergies that we had hypothesized are really coming to the fore at this point. And that solution allows for very precise movement of prefabricated data center modules. And so, again, you know, small to start, but really good growth prospects in those markets given our products and what they can help our customers do.

Tom Hayes, Analyst, ROTH Capital Partners: Great. Appreciate the color. I’ll I’ll jump back in the queue.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Mhmm. Thank you.

Will Gildea, Analyst, CJS Securities: Thanks, Tom.

Carly, Conference Operator: Your next question is from Ross Farenblack with William Blair.

Ross Farenblack, Analyst, William Blair: Hey, good morning, gentlemen.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Good morning. Good morning.

Ross Farenblack, Analyst, William Blair: Congrats on the acquisition this morning. Thanks, Ross. Maybe just kicking off there. Yeah. Can we maybe just, you know, speak to the competitive landscape?

Sounds like they’re 15%, 20% of their own TAM. Just any other competitors to be aware of?

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Yeah. It’s, I would say, Ross, like like Enerpac, it’s it’s a fairly large and fairly fragmented market. For most of what SFE does, they are, I would say, either market leader or in top, you know, two or three positions in the market. That’s probably more true in The Americas given they’re waiting in this geography, which obviously is one of the reasons we’re excited about the revenue synergies and our ability to help them grow more internationally. But they their set of brands are very premium position and enjoy, you know, really nice share of the market today.

But, again, you know, there is a whole host of sort of fragmented competitors, which, by the way, over time may present additional, you know, inorganic growth opportunities. One of the things that we also liked as we talked about regarding SSP has been their ability to grow inorganically, and they’ve added on a number of businesses and brands over the years that Gladstone has owned them. And that they actually come with a funnel of other opportunities as well. So in time, I think that will help boost our own corporate development opportunities here.

Ross Farenblack, Analyst, William Blair: Okay. I was trying to get a sense if there’s anybody else that really stands out as being, you the dominant provider across any one of these end markets. And if you look back the last five years or so, do you get the sense that they’re organically taking share or just kind of growing with the market? And if they are, what is it in that strategy? Is it geographic or more just you know, end market related, brand related?

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Yeah. No. I I would say there’s no standout, in my view, competitor. There is a whole host of them. And, certainly, over time, we can share more in our investor materials around that.

But just like Enerpac, I mean, we always remain paranoid around the competitive set and our positioning in the market, so does SFE. But, again, I’m I’m I’m I feel confident in their, you know, their their positioning today. I think our view is that they have been taking share over the last few years. I think they’ve been excelling, in terms of commercial execution in the marketplace, some of the innovation that they’ve launched as well. And I think the combination of those things has really allowed them to get this effectively grow faster than the market is our view.

Ross Farenblack, Analyst, William Blair: Okay. That’s good to hear. And then just thinking about kind of their end market exposure to PowerGen infrastructure versus Enerpac, you know, how do you see those end markets grow? And then maybe just the ability to leverage that go to market, what would that look like going forward in the two product portfolios?

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Yeah. Absolutely. I mean, if you if you look at slide seven, that does break down end market, exposure. And, again, that was a really attractive element as we evaluate this opportunity with SFE. I mean, they’ve got, you know, fairly extensive exposure on the power gen and energy market, as well as aero and military and defense.

So those are markets that are, I think, very attractive with what we believe have long term, you know, really positive fundamentals underlying them. And then, of course, the semiconductor and data center market as well where they, I would say, have more significant exposure than we do today. I mean, if you if you step back and think about about it at a very high level, basically, almost all of SFE’s portfolio are tools used for round stuff for pipes to make it very simple. Anywhere you need a pipe, you need to cut a pipe, put pipes together, well pipes, things like that. That is, in essence, what a lot of their tools enable for their customers, obviously, with high precision, high quality.

And if you think about these end markets, there’s a lot of round equipment, round pipes in those markets, especially things like data center and semiconductors where they need pipes for cooling. So, again, just a really attractive element, for us. So and I think, you know, the combination of the two, you know, gives us more leverage to drive more penetration collectively in those end markets.

Ross Farenblack, Analyst, William Blair: Okay. Well, I mean, it’s kinda looking at the website. It appears to be more nuclear renewables. When we think about that, you know, 35% energy as part gen, what is kind of that oil and gas mix?

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: It’s a pretty, important element. Yeah. I I mean, I I think that website, I would take sort of just as color, but, you know, the data that we share I mean, there’s there’s a good element in there that is, refinery, petrochem related as well. And they do do a fair bit of nuclear, which, as you know, is a good end market here for Enerpac. We even have some specialty product lines dedicated to the nuclear market.

So, yeah, they they participate in wind as well like we do, probably similar exposure to what Enerpac has in wind today, single digits.

Ross Farenblack, Analyst, William Blair: Awesome. That’s very helpful. Thank you, I’ll jump back in queue.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Thank you.

Darren Kosick, Chief Financial Officer, Enerpac Tool Group: Thanks, Ross.

Carly, Conference Operator: Your next question is from Steve Silver with Arcus Research.

Steve Silver, Analyst, Arcus Research: Thanks, operator, and thanks for taking my questions and congratulations on the deal as well.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Thanks, Steve.

Steve Silver, Analyst, Arcus Research: So the leverage for the company you guys have brought down to 0.5 times through Q3 and you’ve estimated it going up to about 2.8 times at the closing of the deal and then forecasting a return to about 2.2 times after the end of year one. Just curious as to whether that those forecasts changes your views of your capacity, your appetite for additional tuck in M and A? Or are you really focused on bringing your leverage back within the range?

Darren Kosick, Chief Financial Officer, Enerpac Tool Group: Good question, Steve. So, you know, I would say to give everyone, some flavor on SFP Group, their profile, their cash generation profile is very similar to ours. Okay? When you look at their business, their CapEx as a percent of revenue runs one to 2%, very similar to us. So we’re confident in that ability to pay down that debt to get to our target leverage of one and a half to two and a half.

You know, as we look at the next twelve months, that will be a focus, but we will also have access to additional capital to do tuck in m and a or potentially share repo. So we do have options ahead of us, and we do have flexibility just given where our leverage will stand.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Yeah. And I would add, Steve, again, referenced, the team at SFE does actually come with an existing funnel of additional inorganic opportunities. Some of those are smaller tuck ins, and and we may look to pursue those, you know, just given the strength of our balance sheet. So, I mean, obviously, we wouldn’t be looking to do anything outsized until we get back to a more comfortable leverage position, but smaller things are certainly in the realm of possibility.

Steve Silver, Analyst, Arcus Research: Great. So just circling back to The Middle East, I know you guys talked about in the prepared remarks really what you’re seeing in terms of the protracted conflict there. But you also mentioned that you expect some or at least see recoveries being more likely in fiscal twenty twenty seven. So I’m just curious as what you guys see as the potential risk or the pain points coming out of that conflict given the fact that the situation does remain so fluid even like five, six months into this conflict at this point?

Darren Kosick, Chief Financial Officer, Enerpac Tool Group: As a reminder, know, The Middle East in our business, it’s roughly about 10% of our business or about 60,000,000. So, that’s kind of the size of it. You know, as we look at what happened in q three, you know, we did have one big shutdown that was pushed out, Steve. You know, obviously, the news over the last couple days, there may still be more push outs. You know, I think as Paul and I look at The Middle East and we think of the opportunity, you know, it’s not if, it’s when.

Okay? You know, and that’s the lens we’re taking. We do think there’ll be opportunities for us there in the future. Just with the conflict, it may take time.

Steve Silver, Analyst, Arcus Research: Okay, great. And then one more, if I may. The prepared remarks talked about SFE having about 1,400 active distributors. And I know you guys have done quite a bit of work over the last couple of years consolidating your own distributor network. So I’m just curious as to whether there’s a lot of overlap there in terms of the distribution network and how you guys plan to really just consolidate that distribution network post closing?

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Yeah. Great question, Steve. I mean, you know, as we get into integration planning, that’s certainly a key area of focus on the commercial side of how we leverage the strength of both of our channels, drive accelerated growth in both Enerpac and SFE. They’ve got a really exciting, strong, very extensive distribution channel partner network. There’s certainly some overlap with what Enerpac does today, but it’s like a Venn diagram.

Right? There are areas where we have a distribution or types of channels that they don’t have or aren’t as strong in, and there are areas where they have channel partners that traditionally we aren’t as strong in. I’ll give you an example. The welding channel, you know, given what they do with Axair and some of their other product lines, is a reasonably strong channel for SFE, a channel that Enerpac really hasn’t traditionally played in. So we’ll evaluate that at the appropriate time through the commercial organization, but we do think there are some opportunities to leverage the combined scale of the distribution networks.

Steve Silver, Analyst, Arcus Research: Great. Thanks so

Ross Farenblack, Analyst, William Blair: much for taking the questions.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Thank you.

Carly, Conference Operator: There are no further questions at this time. I’ll now turn the call back over to Paul Sternley for any closing remarks.

Paul Sternleab, President and Chief Executive Officer, Enerpac Tool Group: Okay. Well, thank you again for joining us on the call this morning. As I mentioned, we will be attending the CJS twenty six Annual New Ideas Summer Conference in White Plains tomorrow. So please join us if you’re able. Thanks again, and have a great day.

Carly, Conference Operator: Ladies and gentlemen, that concludes today’s call. Thank you for joining. You may now disconnect.